Motorola TETRA MTM800 Manual page 225

• Select the mail recipient of your choice by scrolling
through the address list (see page 71) or enter the
address directly.
Press PTT to send the message. The display will show
one of the following delivery reports:
Message Delivered
successfully sent and received.
Message Failed
• Scroll to
your message to the Template List (the
number assigned to the message is the
lowest free number – in this case tem-
plate number 3).
If provisioned by your Service Provider, it may be possible to
compose and send text messages from a busy talkgroup. The
group audio will be suspended when a new message or
template is being edited. During this time it is possible to
receive a new emergency call and message editing will be
aborted. If a new private/telephone call is received the message
will be restored after that call completes.
Sending, Editing, and Erasing a User Defined Template
The user defined mail templates are received, new, sent, or
programmed messages that are stored in the Templates List
and may be re-stored for sending.
1. Scroll to
the Template List is displayed.
It is possible that the templates numbers are not consecutive.
2. Scroll through the Templates List using the navigation keys
and choose the required template.
3. Press
• Scroll to
your choice by scrolling through the address list (see
page 71) or enter the address directly.
— to indicate that the message was
— the message was not received.
and press
Store
and press
2 Templates
and scroll to your selection:
and press
Send
to add
Stored in
Template 3
. The first template in
Select the mail recipient of
101