Key Overview - Motorola TETRA MTM800 Manual

Press 1
you have left the RF sensitive area where the TXI Mode was
recommended. If the MTM800 was previously used in
Trunked Mode (TMO), it will register to the network.
If you press
TXI and Direct Mode, it will exit TXI Mode and remain in
Direct Mode.
If the terminal was previously in Trunked Mode with TXI
enabled, pressing
If you press
TXI and Direct Mode, it will remain in TXI and Direct Mode.

Key Overview

The Mode Keys
The MTM800 has four major call modes when operating in
Trunked Mode Operation (TMO):
• Group mode
• Private mode
• Phone mode
• PABX mode
numbers calls.
PABX mode will only be displayed if enabled by your Service
Provider
If configured by your Service Provider, Group mode is the
home mode to which the MTM800 returns automatically
when there is no activity for a few seconds in another mode
or in the menu.
Group mode can operate either in
• In Trunked Mode Operation (TMO) the MTM800 is used
with the infrastructure services within system coverage, or
• In Direct Mode Operation (DMO) the MTM800 is used
without infrastructure services required.
12
if you want to deactivate the TXI Mode
1 , and the terminal was previously used in
2
will power off the terminal.
ABC
2
, and the terminal was previously used in
ABC
to send and receive Group Calls.
—
to send and receive Private Calls.
—
to send and receive Phone Calls.
—
to send and receive local (office) extension
—
e.g. if
—