Home Mode Display; Terminal Disable/Enable - Motorola TETRA MTM800 Manual

To use the one-touch feature:
• From any mode, press and hold the required numeric key
for a few seconds.
• Your MTM800 will display the number or function and act
according to the programmed feature.
One-touch Private Call is set by the Service Provider.
1. If it is set to Simplex, then outgoing Private Call is Simplex
too.
2. If it is set to Duplex, then outgoing Private Call can be
duplex in TMO, Simplex in DMO with the last Group Call
Originator number.
3. If it is set to Duplex, then outgoing Private Call can be
duplex in TMO and cannot be initiated in DMO when the
phone book index is required.

Home Mode Display

Your MTM800 is provided with a feature that allows your
Service Provider to send special text messages to your
MTM800 display.
The message is displayed when your
MTM800 is inactive.
The message will stay on your MTM800
display until a new message is received.
If configured by your Service Provider, your MTM800 will
display an internal Home Mode Display until another
message is received.

Terminal Disable/Enable

Your MTM800 is provided with a feature that allows your
Service Provider to disable it temporarily (in case it is stolen
or lost) wireless.
During the time your MTM800 is disabled, no calls can be
initiated or received.
18
Range 1
<HomeModeTxt>