Motorola TETRA MTM800 Manual page 195

Adding a Number (
To enter the sub-menu,
press
– 2 Addr. Book – 1 Private
changes to
1 Add ID
the address book edited.
1. Press The MTM800 will prompt you to add an entry to
.
the existing list. The entry is composed of a number, name,
and location. First enter the number and name.
2. Press to confirm. Then select the location of the entry
in the list.
3. The first empty location (if any) is suggested as the default
location for storing the entry. You can select another
location either by scrolling through the list of locations or by
typing the location number. If a location is already used, you
will be prompted to overwrite the existing entry started in
that location.
4. When the entry is successfully stored, the display returns
to the entry adding screen within a few seconds.
Searching the Address Book Alphabetically (
or by Location (
1. To enter the sub-menu,
press
– 2 Addr. Book – 1 Private and
or
2 abc Order
2. Scroll through the list alphabetically (or type the first letter
of the name you are searching in the pre-stored list).
Alternatively, scroll through the list by location (or type the
location number).
After finding a number, press
3. Scroll to your selection:
• the entry (see "Editing the Text" on page 15). The
Edit
original location is suggested as the default location for
storing the edited entry.
To select another location, scroll through the list of loca-
tions or type the location number. If a location is already
2 1 1)
1 Add Phone
2 1 3)
.
3 By Locat'n
PTT
– 1 Add ID.
or to depending on
1 Add Ext.
1 Add ID
2 abc Order
to start a call.
2 1 2)
71