Motorola TETRA MTM800 Manual page 166

Selecting
DMO Group Call via Repeater (
While in DMO, proceed as follows to choose the Repeater
option to set up a call via Repeater for the selected talkgroup:
1. Press
press
2. Scroll to 3 Repeater and press
3. The MTM800 will use the first available
repeater for that talkgroup. The repeater
icon will blink upon selecting that option.
When the MTM800 detects the proper
repeater presence signal, the Repeater icon
will turn solid.
Selecting
DMO Group Call via Gateway and Repeater (
While in DMO, proceed as follows to choose the Gateway
and Repeater option to set up a call via Gateway or Repeater
(Gateway preferred) for the selected talkgroup.
1. Press
2. Scroll to
3. The display shows the last "GW + Rep."
type selection. Use the navigation key to
scroll to your selection and press
Automatic — the MTM800 will use the first
available gateway for that talkgroup. The Gateway icon and
the repeater icon will blink upon selecting that option.
Specific — the MTM800 will use only the gateway with the
specified Gateway address for that talkgroup.
Upon selecting "Specific", you will see one of the following
displays:
• The selected gateway address (e.g.:
1022), pre-programmed by your Serv-
ice Provider or previously entered by
yourself via the keypad. Press
use the current address, or enter a new address via the
42
, use the navigation keys to scroll to
.
, scroll to
3 Config.
and press
4 GW + Rep
3 3)
.
and press .
.
:
to
and
3 Config
DMO Range1
DMO TG10
DMO Range1
DMO TG1
3 4)
1 Automatic
2 Specific
GW No: 1022
Avail. Rep.