Motorola TETRA MTM800 Manual page 204

Scroll to the desired language and press
shows the selected language for a few seconds.
Setting Up Data Mode (
You can connect the MTM800 to an external device (such as
a laptop or desktop PC). The MTM800 will then be capable of
transmitting and receiving data from the external device. The
external device must run an application complying with the
TETRA standards.
Once in the Setup sub-menu, select
The display shows the current setting:
Voice Only
transmit voice calls only.
Data Only
will reject incoming and outgoing voice calls, except for
emergency calls, status and text messages.
Voice&Data
will have priority over data calls and will interrupt them.
Scroll to the desired setting and press
In
Data Only
icon is displayed after you have connected the MTM800 to
the external device and the MTM800 is ready for data
transfer. The Data Transmit/Receive icon indicates that data
transfer is currently taking place.
The MTM800 ends the Ambience Listening (AL) call and the
microphone is closed when the MTM800 is in one of the
following states:
• Entering the out-of-service area
• Outgoing packet data call setup
To exit data mode, return to
Voice Only
communication, except when in Data Only Mode.
Data services are available only in TMO. Data Services are
blocked in TXI Mode.
80
4 3)
— the MTM800 will receive and
— the MTM800 acts as a modem. The MTM800
— the MTM800 acts as a modem but voice calls
and in
Voice&Data
The MTM800 returns automatically to Voice
.
3 Data Setup
.
modes, the "Data Connected"
and select
3 Data Setup
The display
.
.
1 Voice Only
2 Data Only