Motorola TETRA MTM800 Manual page 161

2. To return to the initial Mode display
press
3. To select the DGNA group, press
group using the navigation key, and press
Once you exit the DGNA notification screen, the Select key
disappears. To select one of the newly added groups, see
page 28.
If configured, a newly added group will be automatically
attached as the selected group and will replace the currently
selected group. If the group is later removed, the terminal
reselects the last selected group prior to receiving the
automatic attachment.
If configured, a newly added group will also become the
newly selected talkgroup.
If this group is de-assigned, and no group changes or power
cycling have occurred, the terminal will revert to its previous
talkgroup.
If a new DGNA is received during scrolling,
you will receive a message, indicating that
the list of talkgroups was updated.
After a few seconds the display returns to the
initial DGNA display detailing the update:
If the DGNA received is an all "Talkgroups
delete" assignment, your MTM800 will
display the following:
DGNA Reception without Notification Message
If DGNA notification was not configured by your Service
Provider, you will get a tone indication and notification
message only and only if a selected group was changed by
the DGNA.
.
. Or scroll to another
.
TG list
Updated
18 TG Removed
All TalkGroups
Deleted
37