Network
Storage
Video
Other PCI devices
3.6.2.13 USB Configuration
The USB Configuration menu helps read USB information and configures USB settings.
Item
USB transfer time-out
Device reset time-out
Device power-up delay
UEFI only
Do not launch[Default]
UEFI
Legacy
Do not launch
UEFI
Legacy[Default]
UEFI
Legacy[Default]
Do not launch
UEFI
Legacy[Default]
Options
1 sec
5 sec
10 sec
20 sec[Default]
10 sec
20 sec[Default]
30 sec
40 sec
Auto[Default]
Manual
Controls the execution of UEFI and Legacy PXE
OpROM.
Controls the execution of UEFI and Legacy
Storage OpROM.
Controls the execution of UEFI and Legacy Video
OpROM.
Determines OpROM execution policy for devices
other than Network, Storage, or Video.
Description
The time-out value for Control, Bulk, and Interrupt
transfers.
USB mass storage device Start Unit command
time-out.
Maximum time the device will take before it properly
reports itself to the Host Controller. 'Auto' uses
default value: for a Root port it is 100ms, for a Hub
port the delay is taken form Hub descriptor.
ERX-C236KP User's Manual 63
User's Manual