Advertisement
Step 2
SS15
The main frame pieces reinforce
the walls. These piece will later be
installed at the top edge of the side
walls and the rear wall. Proceed as
follows:
1
Overlap the rear wall angle pieces
as shown in the fi gure and fasten
them together with one bolt in the
center hole.
2
Make two side wall angles by
overlapping the side wall angle pieces
as shown. Fasten each set together
with one bolt thru the second large
hole from the end of each part.
3
Double check the length of each
and set these pieces aside for later
use.
Parts Needed For
Frame Assemblies
5986
STEP
2
15
STEP
1
5986
10391
Rear Wall Angle
118 1/8"
Side Wall Angles 157 3/8"
5986 Rear Wall Angle (2)
10391 Side Wall Angle (4)
Rear Wall Angle
118 1/8"
300,0 cm
Side Wall Angles
157 3/8"
399,7 cm
10391
300,0 cm
399,7 cm (2 Assemblies)
Advertisement
