Advertisement
Step 2
B15
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled in the center and at the top
edge of the rear wall. Proceed as
follows:
1
Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
one bolt in the center hole (three
holes will align).
2
Overlap the rear wall angle pieces
as shown in the figure and fasten
them together with one bolt in the
center hole.
3
Double check the length of each
and set these pieces aside for later
use.
● Parts Needed For ●
Frame Assemblies
9924
STEP
1
6615
STEP
3
● ● ● ● ● 6615 Rear Wall Angle (2)
● ● ● ● ● 9924 Rear Wall Channel (2)
Rear Wall Channel
94 5/8" 240,3 cm
9924
6615
STEP
2
Rear Wall Channel
94 5/8" 240,3 cm
Rear Wall Angle
94 5/8" 240,3 cm
Rear Wall Angle
94 5/8" 240,3 cm
15
Advertisement
