Table of Contents
Advertisement
User manual
4. Assembly and operation
After checking that the package contents are as described, place the parts on a clean and flat
TT1 MI
surface in preparation for set-up. Assembly and set-up of the
are quite straightforward,
as most parts have been factory preassembled.
Please use the white gloves provided to avoid introducing scratches and/or fingerprints during
assembly.
Master Innovation
First, position the two spacer discs (see page 4, package content No. 9) onto the
turntable. Please note, you may need to remove the previous discs/cylinders first.
Please use only the spacer discs provided, as they are specifically height-matched for the
TT1 MI
tonearm.
Master Innovation
Pic. 5: Placing the stainless steel spacer discs onto the
turntable
Made in Germany
7
Advertisement
Table of Contents
