Table of Contents
Advertisement
User manual
Cartridge adjustment
Place a record onto the turntable platter in before starting the final adjustments.
The correct tangential adjustment is essential. To ensure the correct adjustment, use the cartridge
alignment gauge, which must first be placed on the spindle.
The diamond tip of the cartridge must be always aligned in the black line of the gauge.
This fine adjustment can be realised by moving the armwand back or forwards. Simply lock or
unlock the screw on the bottom of the carriage.
Pic. 13: Cartridge adjustment
Re-adjust the tracking force and set the cartridge Azimuth so that it is in a vertical position when
viewed from the front. Make a final check of all the parameters – tonearm level, armwand level,
cartridge alignment and tracking force.
Attention: Before first use or after a long period of storage, please move the cueing lift up and
down approximately 4-5 times so that the oil inside can flow allowing the cueing lift to operate
smoothly.
12
© clearaudio electronic GmbH, 2018/ 05
Advertisement
Table of Contents
