Table of Contents
Advertisement
User manual
TT1 MI
5. Mounting the
Place the tonearm chassis on top of the two spacer discs. Lift it carefully, making sure that the
sliding tonearm bridge is positioned to the rear of both sliding bases as shown in picture 5.
While holding it in place insert the two large hex socket headed bolts provided (see page 4 package
content No. 4) and tighten them (see picture 6).
Please note: Always hold the tonearm in place while tightening the mounting bolts.
Pic. 5: Placing the tonearm chassis on the spacer discs
Pic. 6: Tightening the mounting bolts
8
Master I nnovation
tonearm on the
8 mm
hex wrench
turntable
© clearaudio electronic GmbH, 2018/ 05
Advertisement
Table of Contents
