Delivery, Acceptance And Transportation; Delivery And Acceptance - Agrison HP ULTRA Series Operation Manual

6．Delivery, Acceptance and Transportation

6.1 Delivery and acceptance

When the user purchases a tractor, he should mainly examine the following aspects:

Whether the documents of the tractor are complete or not.
The documents include: Use and Service Manual of Tractor, Warranty Booklet, Catalogue of
Tractor's Parts, List of Accessories (Spare Parts).

Whether the goods of the tractor are complete or not.

Whether the tractor is in good state.
The technical state of tractor may be changed through consignment or movement, thus the
user shall further confirm the tractor's state.
6.2 Transportation
If the tractor is transported by driving, the traffic rules must be strictly complied with, and the
distance between two vehicles shall be kept as 60m at least. Collision caused by accidents must be
avoided. If the tractor is transported by being loaded on a truck, the following points shall be done:

The tractor should be loaded and unloaded on level ground.

The special unloading deck should be used when loading and unloading the tractor.

The assistant must give guidance at site, and unrelated persons can not be close to the site.

Put the hitch rod on the lower position after loading the tractor, pull the hand brake,
engage the reverse gear, and pull out the startup key.

Keep the tire stable with blocks.

Adjust the rear-view mirror downward, and take it off if necessary (dismount the muffler
as far as possible).

When passing culvert and bridge, caution whether the tractor on truck exceeds the height.
Reduce the speed when turning a corner.

The hand brake should be relieved first when unloading, then engage the forward gear,
and drive the tractor with minimum speed from the truck.
Notes:
1. The brake of truck should be clamped in loading and unloading the tractor.
2. The tractor should run with minimum speed in loading and unloading.

Delivery, Acceptance and Transportation

-62-