Do you have a question about the 57301-SV and is the answer not in the manual?
Questions and answers
Rob
July 15, 2025
Hi
I have 2 units out 6 that the light when in auto mode will turn on for 10sec then turn off but then back on in 4 sec even when there is no movement.
Installation Installing the lights - non- Installing the lights - metal metal surface surface Install the metal mounting clips using the screws Installing lights to a metal surface, the metal mounting or double sided tape included with kit, make sure clips are not needed, bottom of each light is magnetic so it they are placed 6-in apart.
Page 6
Preparing for charging Charging the light Attach the charging cord (C) to the connector Place the 2 lights (A) into the charging base (B) on back of the base. The USB port could connect to adapter with 5V 0.5-1A output (not included) for charging. The charging light is red during charging, and will be Green when fully charged.
Need help?
Do you have a question about the 57301-SV and is the answer not in the manual?
Questions and answers
Hi I have 2 units out 6 that the light when in auto mode will turn on for 10sec then turn off but then back on in 4 sec even when there is no movement.