OPERATION
Display Hold
Also holds measured and calculated values shown on the display throughout the course
of Data Hold
Available input: Off, On
Setpoint
Mirror heating temperature during DCC, relative to last measured dew point
Available input: 10 to 40
Period
Duration of a DCC
Available input: 0:01 to 0:59
Interval
Time between automatic DCC cycles
Available input: 1 to 99 hours. Set 0 to disable automatic DCCs
Reset Optics
Triggers a reset of the optical signal level on the next DCC cycle
Output Hold
Time to hold the output at the last measured value after finishing a DCC
Available input: 4 to 59 minutes
3.2.2
Logging
18
Optisure Remote User's Manual
DCC Menu
Table 6
Logging Screen
Figure 15
March 2018