Remote Pressure Transducer (Optional); Figure 10 Remote Pressure Transducer Connection - Kahn Optisure Remote User Manual

Optisure Remote User's Manual
2.5.9

Remote Pressure Transducer (Optional)

1. Rotate the body of the pressure transducer connector until it locates in the
socket labelled
2. Push the connector into the socket until it locks. NOTE: Do not attempt
to force it into the socket. If it will not fit in, rotate it until the key
locks and it pushes in easily.
3. To remove the connector, slide the connector's body collar back along its
axis, away from the instrument, to release the lock and then gently pull the
connector body out of its socket. NOTE: Do not attempt to pull it out
with the cable, make sure that the collar is first released.
Kahn Instruments
PRESSURE TRANSDUCER.
Remote Pressure Transducer Connection
Figure 10
INSTALLATION
13