Dew-Point Sensor Connection; Remote Prt Probe; Figure 6 Dew-Point Sensor Connection - Kahn Optisure Remote User Manual

INSTALLATION
2.5.4

Dew-Point Sensor Connection

The dew-point sensor contains the optical system and the chilled mirror. It is fitted with
an M12 connector to allow easy and secure connection to the instrument using the
supplied sensor cable.
2.5.5

Remote PRT Probe

1. Rotate the body of the PRT probe connector until it locates in the socket
labeled
2. Push the connector into the socket until it locks. NOTE: Do not attempt
to force it into the socket. If it will not fit in, rotate it until the key
locks and it pushes in easily.
3. To remove the connector, slide the connector's body collar back along its
axis, away from the instrument, to release the lock and then gently pull the
connector body out of the socket. NOTE: Do not attempt to pull it out
with the cable, make sure that the collar is first released.
10
Figure 6
REMOTE TEMPERATURE
Figure 7
Optisure Remote User's Manual
Dew-Point Sensor Connection
(See Figure 7).
Remote PRT Connection
March 2018