Table of Contents
Advertisement
Optisure Remote User's Manual
2.1.
USB Communication
1.
Connect the Optisure Remote to the PC using the supplied USB cable.
2.
Windows will recognize the instrument and automatically install the
relevant drivers. If the driver installation has been successful then the
Windows Device Manager Screen will list the following driver (see Figure
28) :
Kahn Instruments USB to UART Bridge Controller
3.
Launch the application software and choose one of the following types of
connection:
4.
Auto Detect – The application software will attempt to find the correct
COM port automatically.
5.
Manual – Choose the appropriate COM port from the drop down list, as
shown in the Windows Device Manager Screen.
6.
Click the
Kahn Instruments
OK
button to proceed to the next screen.
Windows Device Manager Screen
41
Advertisement
Table of Contents
