Optisure Remote User's Manual
2.5.6
USB Communications Port Connector
The instrument features a USB port for communication with the Application Software.
The appropriate cable will be supplied with the instrument.
1.
Check the orientation of the connector and gently push it into the socket
labelled
2.
To remove the connector, pull it out of the socket by holding the connector
body. Do not attempt to remove it from the socket by pulling on
the cable.
2.5.7
Ethernet Port (Optional)
The instrument features an optional RJ45 port for communication with the Application
Software.
1.
Check the orientation of the connector and gently push it into the socket
labelled LAN.
2.
To remove the connector, depress the small locking tab on the top and pull
it out of the socket by holding the connector body.
For more information on how to configure the Application Software see the section at
the end of the manual.
Kahn Instruments
USB
(see Figure 8) .
Figure 8
Figure 9
USB Port Connection
Ethernet Port
INSTALLATION
11