Table of Contents
Advertisement
Optisure Remote User's Manual
Safety
The manufacturer has designed this equipment to be safe when operated using the procedures
detailed in this manual. The user must not use this equipment for any other purpose than that
stated. Do not apply values greater than the maximum value stated.
This manual contains operating and safety instructions, which must be followed to insure the safe
operation and to maintain the equipment in a safe condition. The safety instructions are either
warnings or cautions issued to protect the user and the equipment from injury or damage. Use
qualified personnel and good engineering practice for all procedures in this manual.
Electrical Safety
The instrument is designed to be completely safe when used with options and accessories supplied
by the manufacturer for use with the instrument. The input power supply voltage limits are 85 to
264 V AC, 47/63 Hz. Refer to Appendix A - Technical Specifications.
Pressure Safety
DO NOT permit pressures greater than the safe working pressure to be applied to the sensor. The
specified safe working pressure is 290 psig (20 barg) or 3625psig (250barg) for the high pressure
version. Refer to Appendix A - Technical Specifications.
Application of gas pressures higher than the specified maximum will result in potential damage
and may render the instrument unsafe and in a condition of incorrect functionality. Only personnel
trained in the safe handling of high pressure gases should be allowed to operate this instrument.
Refer to Appendix A - Technical Specifications.
Repair
The instrument must be repaired by the manufacturer. Please contact Kahn Instruments at parts.
service@kahn.com.
Calibration
The recommended calibration interval for the Optisure Remote is one year, unless otherwise specified
by Kahn Instruments. The instrument should be returned to Kahn (please contact parts.service@
kahn.com).
Kahn Instruments
v
Advertisement
Table of Contents
