Table of Contents
Advertisement
2. Nomenclature and General Technical Features (cont.)
Victaulic-weld Connection with Y Filter Kit
Contains couplings and tubes with Victaulic® standard
grooves, Y fi lter (Mesh 40) and pipe sections for welding in
the piping. These parts are intended to provide a complete
system for connection to the evaporator as well as its
protection through the fi lter, which is a mandatory part of
the hydraulic system.
The Y fi lter (Mesh 40) shall be installed at the water inlet of all
modules, thus preventing severe damage to the evaporator.
The connection kit comes in a wooden packaging. If the
box is discarded make sure that there is no product in it.
(See figure 6 below).
FIG. 6 - Location of Victaulic Kit
12
NOTE
KIT Storage
ARMAZENAMENTO DOS KIT´S
FIG. 5 - Victaulic-Weld Connection Kit with Y Filter
Wooden
box
Advertisement
Table of Contents
