MakerBot Replicator Z18 Teardown Manual page 9

Table of Contents

Tools Needed1
Step 1 - Remove The Outer Panel Assembly2
Step 2 - Remove Front Door2
Step 3 - Remove Front Panel3
Step 4 - Remove The Insulation3
Step 5 - Remove The Filament Drawer Assembly4
Step 6 - Remove The User Interface Assembly4
Step 7 - Remove The Gantry Assembly5
Step 8 - Remove The Four (4) Uprights6
Step 9 - Remove The Z-Stage And Inner Housing Assembly6
Step 10 - Remove The Power Supply8