Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Avalue Technology VMS-CFS
Summary of Contents for Avalue Technology VMS-CFS
- Page 1 VMS-CFS Intel® Pentium® /Celeron® /Core™ i7/i5/i3 SoC BGA Processor Fanless Vehicle Telematics System Quick Reference Guide Ed – 30 August 2019 Copyright Notice Copyright 2019 Avalue Technology Inc., ALL RIGHTS RESERVED. Part No. E2017HAK0A4R...
- Page 2 These answers are normally a lot more detailed than the ones we can give over the phone. So please consult the user’s manual first. To receive the latest version of the user’s manual; please visit our Web site at: http://www.avalue.com.tw/ 2 VMS-CFS Quick Reference Guide...
-
Page 3: Table Of Contents
1.4.1 Front View ..........................14 1.4.2 Rear View ........................... 14 System Dimensions ..................... 16 Hardware Configuration ................... 17 VMS-CFS connector mapping ................18 2.1.1 Serial Port 1 connector (COM1)....................18 2.1.2 Serial Port 2 connector/CAN connector (COM2/CAN) .............. 19 2.1.3 Serial Port 3 connector (COM3).................... - Page 4 3.6.2.5.4 Serial Port 4 Configuration ....................54 3.6.2.5.5 Serial Port 5 Configuration ....................55 3.6.2.5.6 Serial Port 6 Configuration ....................55 3.6.2.5.7 Serial Port 7 Configuration ....................56 3.6.2.5.8 Serial Port 8 Configuration ....................57 4 VMS-CFS Quick Reference Guide...
- Page 5 Restore Defaults ......................84 3.6.6.4 Launch EFI Shell from filesystem device ................ 84 4. Drivers Installation ....................... 85 Install Chipset Driver ................... 86 Install VGA Driver ....................87 Install Audio Driver (For Realtek ALC892 HD Audio) .......... 88 VMS-CFS Quick Reference Guide...
- Page 6 VMS-CFS Install LAN Driver (For Intel I211AT) ..............89 Install Serial IO Driver ..................91 Install ME Driver ....................92 Install IRST Driver ....................93 6 VMS-CFS Quick Reference Guide...
-
Page 7: Getting Started
1 x VMS-CFS Other major components include the followings: — 1 x Accessory kit (Dust cover, Rubber foot and Screws) — 1 x DP to VGA Adapter — 1 x Integrated Wall Mount Kit VMS-CFS Quick Reference Guide... -
Page 8: System Specifications
Front Side External 1 x Push Button for Power on/off w/ LED I/O Connector 1 x Push Button for Reset in hiding 3 x LEDs for Storage, WLAN/ HSDPA 1 x Line-Out 8 VMS-CFS Quick Reference Guide... - Page 9 (Factory Option NEO-M8U with Read Recording Supported) Interface UART Display Processor Graphics Chipset Intel® UHD Graphics 630 (i7-8700T, i5-8500T,i3-8100T) Intel® UHD Graphics 610 (Pentium G5400T, Celeron G4900T) 1 x DP in Edge Connector Connector VMS-CFS Quick Reference Guide...
- Page 10 Type 1, CE, FCC Class A w/ERP, E Mark, ISO 7637-2 Type 2, CE, FCC Class A w/ERP, EN50155, EN50121, EN45545-2 *OT1, OT2, OT3, OT4 Certification *S1, S2, S3 *Class C1, C2 Dust and Rain Test IP 50 Rating 10 VMS-CFS Quick Reference Guide...
- Page 11 This function will be active if ACC Function (JACC1) sets up Disable (Industrial PC power mode). Power Input Selection (SW2) To set up the DC input voltage is +12Vdc, +24Vdc or wide range from +9~36Vdc. Vin Work/Shutdown (BIOS) VMS-CFS Quick Reference Guide 11...
- Page 12 +12Vdc, +24Vdc or wide range from +9~36Vdc. The following behaviors happen if ACC Function (JACC1) sets up as Enable: VMS-CFS won’t power on if the DC Input voltage is lower than the startup voltage. VMS-CFS will automatically power on, if the DC input voltage reaches the startup voltage.
- Page 13 if the ignition is turned on again and the power off delay ended. VMS-CFS will cancel the delay and stayed in power off status, if the ignition is turned off again and power on delay is in process.
-
Page 14: System Overview
1.4 System Overview 1.4.1 Front View 1.4.2 Rear View Connectors Label Function Note Power Power on button 6 x USB 3.2 Gen 1 connector USB 3.2 Gen 1 SIM card slot 3 x SIM card slot 14 VMS-CFS Quick Reference Guide... - Page 15 Serial port 1 connector Serial port 2 connector COM2/CAN CAN connector COM3 Serial port 3 connector LVDS LVDS connector DC-in DC power-in connector DC-out DC power-out connector HDMI 2 x HDMI connector Antenna hole 5 x Antenna hole VMS-CFS Quick Reference Guide 15...
-
Page 16: System Dimensions
VMS-CFS 1.5 System Dimensions (Unit: mm) 16 VMS-CFS Quick Reference Guide... -
Page 17: Hardware Configuration
Quick Reference Guide 2. Hardware Configuration Jumper and Connector Setting, Driver and BIOS Installing For advanced information, please refer to: 1- EBM-CFSV included in this manual. Note: If you need more information, please visit our website: http://www.avalue.com.tw VMS-CFS Quick Reference Guide 17... -
Page 18: Vms-Cfs Connector Mapping
2.1.1 Serial Port 1 connector (COM1) In RS-232 Mode Signal Signal NDCD# NDSR# NRXD NRTS# NTXD NCTS# NDTR# NRI# In RS-422 Mode Signal Signal TxD1- TxD1+ RxD1+ RxD1- In RS-485 Mode Signal Signal DATA1- DATA1+ 18 VMS-CFS Quick Reference Guide... -
Page 19: Serial Port 2 Connector/Can Connector (Com2/Can)
In RS-232 Mode Signal Signal NDCD# NDSR# NRXD NRTS# NTXD NCTS# NDTR# NRI# CAN BUS DB9/M In RS-422 Mode 1708- 1708+ Signal Signal 1939- TxD1- 1939+ TxD1+ RxD1+ RxD1- In RS-485 Mode Signal Signal DATA1- DATA1+ VMS-CFS Quick Reference Guide 19... -
Page 20: Serial Port 3 Connector (Com3)
Serial Port 3 connector (COM3) In RS-232 Mode Signal Signal NDCD# NDSR# NRXD NRTS# NTXD NCTS# NDTR# NRI# 2.1.4 DC power-in connector (DC-in) Signal VIN + (BAT+) ACC (IGN) VIN- (BAT-) 2.1.5 DC power-out connector (DC-out) Signal +12V 20 VMS-CFS Quick Reference Guide... -
Page 21: Lvds Connector (Lvds)
3.3V Backlight_EN VBRIGHT USB_VCC CLK+ USB_GND CLK- Note: This connector included LVDS, USB, 12V and 5V interfaces. 2.1.7 General purpose I/O connector (GPIO) Signal Signal PIN Signal DIO_GPO0 DIO_GPI2 DIO_GPI0 DIO_GPO3 DIO_GPO1 DIO_GPI3 DIO_GPI1 DIO_GPO2 VMS-CFS Quick Reference Guide 21... -
Page 22: Ebm-Cfsv Overviews
VMS-CFS 2.2 EBM-CFSV Overviews 22 VMS-CFS Quick Reference Guide... -
Page 23: Ebm-Cfsv Jumper & Connector List
7 x 2 header, pitch 2.00 mm DP connector MINI_PCIE1 Mini PCI Express connector RSTBTN1 Reset button LED1 LED Power HDD 1 x M.2 KEY-E 2230 connector NGFF1/2/3 2 x M.2 KEY-B 2242/3042/2280 connector LOUT1/2 Audio line-out connector 1/2 VMS-CFS Quick Reference Guide 23... - Page 24 HDMI connector 1/2 DCIN1 DC Input connector 4 x 1 wafer, pitch 2.50 mm JFP1 Front Panel connector 3 x 2 header, pitch 2.00 mm JUSB1 USB connector 5 x 2 wafer, pitch 2.00 mm 24 VMS-CFS Quick Reference Guide...
-
Page 25: Ebm-Cfsv Jumpers & Connectors Settings
Quick Reference Guide 2.4 EBM-CFSV Jumpers & Connectors settings 2.4.1 Clear CMOS (JBAT1) Protect* Clear CMOS *Default 2.4.2 COM 1/2 pin 9 signal selector (JRI1/2) JRI1 JRI2 Ring* +12V * Default VMS-CFS Quick Reference Guide 25... -
Page 26: Com 3 Pin 9 Signal Selector (Jri3)
VMS-CFS 2.4.3 COM 3 pin 9 signal selector (JRI3) Ring* +12V * Default Serial port 1/2 – RS232/422/485 mode select (JCOM_SEL1/2) 2.4.4 JCOM_SEL1 RS-232* JCOM_SEL2 RS422/485 *Default 26 VMS-CFS Quick Reference Guide... -
Page 27: Digital Input Selector (Jdi1)
Quick Reference Guide 2.4.5 Digital Input selector (JDI1) Dry* Mode Digital Input * Default Logic level 1: Close to GND Logic level 0: Open Logic level 1: < 3V Logic level 0: 5V ~ 30V VMS-CFS Quick Reference Guide 27... -
Page 28: Digital Output Selector (Jdo1)
VMS-CFS 2.4.6 Digital Output selector (JDO1) Dry* * Default Note: Output Voltage: Max 250 mA per channel, current sink type. 28 VMS-CFS Quick Reference Guide... -
Page 29: Vehicle/Industrial Pc Power Mode Selector (Jacc1)
It is Vehicle PC power mode (Power on/off controlled by Ignition or Power button) if ACC Function sets up as Enable. It is Industrial PC power mode (Power on/off controlled by Power button) if ACC Function sets up as Disable. 2.4.8 LCD backlight brightness adjustment (JBKL_SEL1) PWM Mode* DC Mode * Default VMS-CFS Quick Reference Guide 29... -
Page 30: Multi-Function Select (Sw1)
VMS-CFS 2.4.9 Multi-function select (SW1) In Serial Port 1 mode RS-232* RS-422 RS-485 In Serial Port 2 mode * Default RS-232* RS-422 RS-485 Power mode Battery Type +12V +24V +9V~+36V* 30 VMS-CFS Quick Reference Guide... -
Page 31: Lpc Port Connector (Jlpc2)
Quick Reference Guide 2.4.10 LPC port connector (JLPC2) Signal Signal LPC_AD0 +3.3V LPC_AD1 RST_BUF# LPC_AD2 LPC_FRAME# LPC_AD3 CLK_24M_80 LPC_SERIRQ +5VSB 2.4.11 LCD inverter connector (JBKL1) Signal +12V BKLEN VBRIGHT VMS-CFS Quick Reference Guide 31... -
Page 32: Spi Connector (Jspi1)
VMS-CFS 2.4.12 SPI connector (JSPI1) Signal PIN PIN Signal +3.3VSB SPI_CS0# SPI_CLK SPI_MISO SPI_MOSI BIOS_HOLD# BIOS_WP# 2.4.13 DC Output connector (DCOUT1) Signal +12VSB +12VSB +12VSB 32 VMS-CFS Quick Reference Guide... -
Page 33: Ec Debug Connector (Jec_Rom2)
Quick Reference Guide 2.4.14 EC Debug connector (JEC_ROM2) Signal Signal +VSPI_EC EC_FSCE# EC_FSCK EC_FMISO EC_FMOSI EC_HOLD# EC_SMCLK_DBU EC_SMDAT_DBG 2.4.15 General purpose I/O connector (DIO1) Signal Signal DIO_GPO0 DIO_GPI0 DIO_GPO1 DIO_GPI1 DIO_GPO2 DIO_GPI2 DIO_GPO3 DIO_GPI3 VMS-CFS Quick Reference Guide 33... -
Page 34: Can Module Connector 1 (Can1)
2.4.16 CAN Module connector 1 (CAN1) Signal BAT_PWR CAN_8 CAN_9 BAT_GND CAN_11 CAN_12 CAN_13 CAN_14 2.4.17 CAN Module connector 2 (CAN2) Signal Signal CAN_PWR CAN_8 CAN_IND CAN_9 BAT_GND CAN_WAKE CAN_11 CAN_TX CAN_12 CAN_RX CAN_13 CAN_14 34 VMS-CFS Quick Reference Guide... -
Page 35: Dc-Input Connector (Jvin1)
Quick Reference Guide 2.4.18 DC-Input connector (JVIN1) Signal +VIN_BAT ACC_ON 2.4.19 Battery connector (BT1) Signal +RTCBATT VMS-CFS Quick Reference Guide 35... -
Page 36: Dc Input Connector (Dcin1)
VMS-CFS 2.4.20 DC Input connector (DCIN1) Signal +VIN +VIN 2.4.21 Front Panel connector (JFP1) Signal PIN PIN Signal PWRBTN_R_IN# PWR_LED+ PWR_LED- PM_R_SYSRST# 36 VMS-CFS Quick Reference Guide... -
Page 37: Serial Port 2 Connector (Jcom2)
Serial port 2 connector (JCOM2) Signal PIN PIN Signal COM2-1 COM2-2 COM2-3 COM2-4 NDSRB# NRTSB# NCTSB# NRIB# 2.4.23 Serial port 3 connector (JCOM3) Signal PIN PIN Signal NDCDC# NRXDC NTXDC NDTRC# NDSRC# NRTSC# NCTSC# NRIC# VMS-CFS Quick Reference Guide 37... -
Page 38: Lvds Connector (Jlvds1)
+3.3V +3.3V LVDS_DATA0_P LVDS_DATA1_P LVDS_DATA0_N LVDS_DATA1_N LVDS_DATA2_P LVDS_DATA3_P LVDS_DATA2_N LVDS_DATA3_N LVDS_DATA4_P LVDS_DATA5_P LVDS_DATA4_N LVDS_DATA5_N LVDS_DATA6_P LVDS_DATA7_P LVDS_DATA6_N LVDS_DATA7_N LVDS_CLK1_P LVDS_CLK2_P LVDS_CLK1_N LVDS_CLK2_N +12V +12V 2.4.25 USB connector (JUSB1) Signal PIN PIN Signal +5VSB USB_DN14 USB_DP14 38 VMS-CFS Quick Reference Guide... -
Page 39: Installing Hard Disk & Memory, Pci Devices
Step 3. Slide HDD into its bracket until properly seated. Step 4. Secure HDD by means of 4 screws. Step 5. Insert HDD bracket into designated locations and fasten with 2 screws to complete HDD installation. VMS-CFS Quick Reference Guide 39... -
Page 40: Hdmi Cable Lock
VMS-CFS 2.6 HDMI Cable Lock Step 1. Lock the cable tie on the screw to secure the HDMI cable. 40 VMS-CFS Quick Reference Guide... -
Page 41: Bios Setup
Quick Reference Guide 3.BIOS Setup VMS-CFS Quick Reference Guide 41... -
Page 42: Introduction
If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. 42 VMS-CFS Quick Reference Guide... -
Page 43: Using Setup
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. VMS-CFS Quick Reference Guide 43... -
Page 44: Getting Help
Even a seemingly small change to the chipset setup has the potential for causing you to use the override. 44 VMS-CFS Quick Reference Guide... -
Page 45: Bios Setup
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. VMS-CFS Quick Reference Guide 45... -
Page 46: System Language
Visit the Avalue website (www.avalue.com.tw) to download the latest product and BIOS information. 3.6.2 Advanced Menu This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 46 VMS-CFS Quick Reference Guide... -
Page 47: Cpu Configuration
Options Description When enabled, a VMM can utilize the additional Intel (VMX) Virtualization Disabled hardware capabilities provided by Vanderpool Technology Enabled[Default] Technology. All[Default] Number of cores to enable in each processor Active Processor Cores package. VMS-CFS Quick Reference Guide 47... -
Page 48: Cpu - Power Management Control
Package C-State Enabled Package C-State Un-demotion. Un-demotion Disabled[Default], C0/C1 Maximum Package C State Limit Setting. CPU Default: Leaves to Factory default value. Auto: Package C State Limit Initializes to deepest available Package C State Limit. 48 VMS-CFS Quick Reference Guide... -
Page 49: Pch-Fw Configuration
Disabled Mode. When disable AMT BIOS Features are no longer Disabled, supported and user is no longer able to access AMT BIOS Features Enabled[Default] MEBx Setup. Note: This option does not disable Manageability Features in FW. VMS-CFS Quick Reference Guide 49... -
Page 50: Oem Flags Settings
Description Disabled[Default], OEMFlag Bit 15: Unconfigure ME with resetting Unconfigure ME Enabled MEBx password to default. 3.6.2.2.2 Firmware Update Configuration Item Option Description Disabled[Default], Me FW Image Re-Flash Enable/Disable Me FW Image Re-Flash function. Enabled 50 VMS-CFS Quick Reference Guide... -
Page 51: Trusted Computing
Item Options Description Enables or Disables BIOS support for security device. Disable, Security Device Support O.S. will not show Security Device. TCG EFI protocol Enable[Default] and INT1A interface will not be available. 3.6.2.4 APCI Settings VMS-CFS Quick Reference Guide 51... -
Page 52: It8528 Super Io Configuration
Set Parameters of Serial Port 7 (COMG). Serial Port 8 Configuration Set Parameters of Serial Port 8 (COMH). Serial Port 9 Configuration Set Parameters of Serial Port 9 (COMI). Serial Port 10 Configuration Set Parameters of Serial Port 10 (COMJ). 52 VMS-CFS Quick Reference Guide... -
Page 53: Serial Port 1 Configuration
3.6.2.5.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.2 Serial Port 2 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled VMS-CFS Quick Reference Guide 53... -
Page 54: Serial Port 3 Configuration
3.6.2.5.3 Serial Port 3 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.4 Serial Port 4 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 54 VMS-CFS Quick Reference Guide... -
Page 55: Serial Port 5 Configuration
3.6.2.5.5 Serial Port 5 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.5.6 Serial Port 6 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled VMS-CFS Quick Reference Guide 55... -
Page 56: Serial Port 7 Configuration
Disabled UART 232(LOOPBACK) UART 232[Default] Change the Serial Port as UART 232 422 485 UART 422 RS232/422/485. UART 485 Enabled 422/485 termination TERM from GPIO. Disabled[Default] 10M bps Slew limiting SLEW from GPIO. 250k bps[Default] 56 VMS-CFS Quick Reference Guide... -
Page 57: Serial Port 8 Configuration
Disabled UART 232(LOOPBACK) UART 232[Default] Change the Serial Port as UART 232 422 485 UART 422 RS232/422/485. UART 485 Enabled 422/485 termination TERM from GPIO. Disabled[Default] 10M bps Slew limiting SLEW from GPIO. 250k bps[Default] VMS-CFS Quick Reference Guide 57... -
Page 58: Serial Port 9 Configuration
Disabled UART 232(LOOPBACK) UART 232[Default] Change the Serial Port as UART 232 422 485 UART 422 RS232/422/485. UART 485 Enabled 422/485 termination TERM from GPIO. Disabled[Default] 10M bps Slew limiting SLEW from GPIO. 250k bps[Default] 58 VMS-CFS Quick Reference Guide... -
Page 59: Serial Port 10 Configuration
Disabled UART 232(LOOPBACK) UART 232[Default] Change the Serial Port as UART 232 422 485 UART 422 RS232/422/485. UART 485 Enabled 422/485 termination TERM from GPIO. Disabled[Default] 10M bps Slew limiting SLEW from GPIO. 250k bps[Default] VMS-CFS Quick Reference Guide 59... -
Page 60: Ec 8528 Hw Monitor
30 Min 1 Hour 6 Hour 18 Hour Disabled[Default] (11.5V, 10.5V)/(23V, 21V) Vin > Vboot: Allow system power on Vin < Vin boot/Shutdown (12.0V, 11.0V)/(24V, 22V) Vshutdown: system shutdown. (12.5V, 11.0V)/(25V, 22V) (12.5V, 11.5V)/(25V, 23V) 60 VMS-CFS Quick Reference Guide... -
Page 61: S5 Rtc Wake Settings
Wake system from S5 Fixed Time Select Dynamic Time, System will wake on the current time Dynamic Time + Increase minute(s). 3.6.2.8 Serial Port Console Redirection Item Options Description Disabled[Default], Console Redirection Console Redirection Enable or Disable. Enabled VMS-CFS Quick Reference Guide 61... -
Page 62: Legacy Console Redirection Settings
Console Redirection is disabled before booting to Always Enable[Default] legacy OS. When Always Enable is selected, then Redirect After POST BootLoader Legacy Console Redirection is enabled for legacy OS. Default setting for this option is set to Always Enable. 62 VMS-CFS Quick Reference Guide... -
Page 63: Usb Configuration
Auto[Default] Floppy enumerates devices according to their media Mass Storage Devices Forced FDD format. Optical drives are emulated as ‘CDROM’, drives with no media will be Hard Disk CD-ROM emulated according to a drive type. VMS-CFS Quick Reference Guide 63... -
Page 64: Nvme Configuration
VMS-CFS 3.6.2.10 NVMe Configuration 3.6.2.11 Network Stack Configuration Item Options Description Enabled Network Stack Enable/Disable UEFI Network Stack. Disabled[Default] 64 VMS-CFS Quick Reference Guide... -
Page 65: Chipset
Quick Reference Guide 3.6.3 Chipset 3.6.3.1 System Agent (SA) Configuration Item Option Description Enabled[Default] VT-d VT-d capability. Disabled VMS-CFS Quick Reference Guide 65... -
Page 66: Memory Configuration
1.5 GB Maximum Value of TOLUD. Dynamic assignment 1.75 GB Max TOLUD would adjust TOLUD automatically based on largest 2 GB MMIO length of installed graphic controller. 2.25 GB 2.5 GB 2.75 GB 3 GB 66 VMS-CFS Quick Reference Guide... -
Page 67: Graphics Configuration
Quick Reference Guide 3.6.3.1.2 Graphics Configuration Item Option Description Select which of IGFX/PEG/PCI Graphics device Auto[Default] Primary Display should be Primary Display Or select SG for IGFX Switchable Gfx. 3.6.3.2 PCH-IO Configuration VMS-CFS Quick Reference Guide 67... -
Page 68: Pci Express Configuration
VMS-CFS Item Option Description Disabled PCH LAN Controller Enable/Disable onboard NIC. Enabled[Default] 3.6.3.2.1 PCI Express Configuration 3.6.3.2.1.1 PCI Express Root Port 6(LAN2-I211) 68 VMS-CFS Quick Reference Guide... -
Page 69: Pci Express Root Port 7(Mpcie)
PCI Express Root Port 7(mPCIE) Control the PCI Express Root Port. Disabled Disabled[Default], Set the ASPM Level: Force L0s – Force all links to L0s State AUTO – BIOS auto ASPM 6 configure DISABLE – Disables ASPM. L0sL1 Auto VMS-CFS Quick Reference Guide 69... -
Page 70: Pci Express Root Port 8(Ngff1-M.2 Keye)
L0s State AUTO – BIOS auto ASPM 7 configure DISABLE – Disables ASPM. L0sL1 Auto Disabled, L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default] Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 70 VMS-CFS Quick Reference Guide... -
Page 71: Pci Express Root Port 15(Ngff2-M.2 Keyb)
L0s State AUTO – BIOS auto ASPM 14 configure DISABLE – Disables ASPM. L0sL1 Auto Disabled, L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default] Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 VMS-CFS Quick Reference Guide 71... -
Page 72: Pci Express Root Port 16(Ngff3-M.2 Keyb)
L0s State AUTO – BIOS auto ASPM 15 configure DISABLE – Disables ASPM. L0sL1 Auto Disabled, L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default] Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 72 VMS-CFS Quick Reference Guide... -
Page 73: Pci Express Root Port 17(Iet)
L0s State AUTO – BIOS auto ASPM 16 configure DISABLE – Disables ASPM. L0sL1 Auto Disabled, L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default] Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 VMS-CFS Quick Reference Guide 73... -
Page 74: Pci Express Root Port 18(Iet)
L0s State AUTO – BIOS auto ASPM 17 configure DISABLE – Disables ASPM. L0sL1 Auto Disabled, L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default] Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 74 VMS-CFS Quick Reference Guide... -
Page 75: Pci Express Root Port 19(Iet)
L0s State AUTO – BIOS auto ASPM 18 configure DISABLE – Disables ASPM. L0sL1 Auto Disabled, L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default] Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 VMS-CFS Quick Reference Guide 75... -
Page 76: Pci Express Root Port 20(Iet)
L0s State AUTO – BIOS auto ASPM 19 configure DISABLE – Disables ASPM. L0sL1 Auto Disabled, L1 Substates L1.1 PCI Express L1 Substates settings. L1.1 & L1.2[Default] Auto[Default] Gen1 PCIe Speed Configure PCIe Speed. Gen2 Gen3 76 VMS-CFS Quick Reference Guide... -
Page 77: Sata And Rst Configuration
The Mode Enable/Disable (Loop Back). Disabled[Default] Enabled[Default] Port 0/1/2/3 Enable or Disable SATA Port. Disabled Hard Disk Drive[Default] Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Drive or Hard Disk Drive. VMS-CFS Quick Reference Guide 77... -
Page 78: Hd Audio Configuration
3.6.3.2.3 HD Audio Configuration Item Option Description Control Detection of the HD-Audio device. Disable = HDA Disabled HD Audio will be unconditionally disabled Enabled = HDA will be Enabled[Default] unconditionally enabled 3.6.3.3 Board & Panel Configuration 78 VMS-CFS Quick Reference Guide... - Page 79 Wake Up by Ring from S3/S4/S5. Enabled[Default] Disabled[Default] 30 sec 40 sec 50 sec Watch Dog Select WatchDog. 1 min 2 min 10 min 30 min Disabled Enable/Disabled USB Standby Power USB Standby Power Enabled[Default] during S3/S4/S5. VMS-CFS Quick Reference Guide 79...
-
Page 80: Security
VMS-CFS 3.6.4 Security Administrator Password Set setup Administrator Password User Password Set User Password 3.6.4.1 Secure Boot 80 VMS-CFS Quick Reference Guide... -
Page 81: Key Management
Custom mode Secure Boot Variables can be Custom[Default] configured without authentication. 3.6.4.1.1 Key Management Item Option Description Disabled[Default] Install factory default Secure Boot keys after the Factory Key Provision Enabled platform reset and while the System is in Setup mode. VMS-CFS Quick Reference Guide 81... -
Page 82: Boot
Setup Prompt Timeout 1~ 65535 key. 65535(0xFFFF) means indefinite waiting. On[Default] Bootup NumLock State Select the Keyboard NumLock state Disabled[Default] Quiet Boot Enables or disables Quiet Boot option Enabled Boot Option #1 Set the system boot order. 82 VMS-CFS Quick Reference Guide... -
Page 83: Save And Exit
Save and exit 3.6.6.1 Save Changes and Reset Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are VMS-CFS Quick Reference Guide 83... -
Page 84: Restore Defaults
This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. 84 VMS-CFS Quick Reference Guide... -
Page 85: Drivers Installation
Quick Reference Guide 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. VMS-CFS Quick Reference Guide 85... -
Page 86: Install Chipset Driver
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step 3. Click Install. Step 4. Click Finish to complete setup. Step1. Click Next. Step 2. Click Accept. 86 VMS-CFS Quick Reference Guide... -
Page 87: Install Vga Driver
Windows 10 operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue installation. Step 2. Step 5. Click Finish to complete setup. Click Yes to accept license agreement. VMS-CFS Quick Reference Guide 87... -
Page 88: Install Audio Driver (For Realtek Alc892 Hd Audio)
Windows 10 operation system. If the warning message appears while the installation process, click Continue to go on. Step1. Click Next to Install. Step 2. Select Finish to complete Installation. 88 VMS-CFS Quick Reference Guide... -
Page 89: Install Lan Driver (For Intel I211At)
Windows 10 operation system. Step 3. Click Next. Step 1. Click Install Drivers and Software Step 4. Click Next. to continue installation. Step 5. Click Install. Step 2. Click Next. VMS-CFS Quick Reference Guide 89... - Page 90 VMS-CFS Step 6. Click Finish to complete setup. 90 VMS-CFS Quick Reference Guide...
-
Page 91: Install Serial Io Driver
Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue setup. Step 4. Click Next. Step 2. Click Next. Step 5. Click Finish to complete the setup. VMS-CFS Quick Reference Guide 91... -
Page 92: Install Me Driver
Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next Step 4. Click Finish to complete the setup Step 1. Click Next to continue setup. Step 2. Click Next. 92 VMS-CFS Quick Reference Guide... -
Page 93: Install Irst Driver
Windows 10 operation system. Step 3. Click Next. Step 4. Click Next. Step 1. Click Next to continue installation. Step 5. Click Next. Step 2. Click Next. VMS-CFS Quick Reference Guide 93... - Page 94 VMS-CFS Step 6. Click Finish to complete setup. 94 VMS-CFS Quick Reference Guide...
Need help?
Do you have a question about the VMS-CFS and is the answer not in the manual?
Questions and answers