Table 5.2 (continued)
Trouble
2 Low battery symbol
is displayed after the
batteries have been
replaced when the
dosimeter is switched
on
5.3.2 At failure to eliminate the troubles presented in Table 5.2, or at detection of
more complicated troubles, the dosimeter should be sent for repair to the repair
services or to the manufacturer (see Repair section).
Probable cause
1 Poor contact between the batteries
and the battery compartment clamps
2 One of the batteries is out of order
28
Troubleshooting
1 Clean out the
contacts on the
clamps and the
batteries
2 Replace the
defected battery