Appendix; Technical Details - Silvercrest SAR 28 A1 Operating Instructions Manual

Defect
GB
CY
The device on
the USB port is
not working
The card reader
cannot read the
card

Appendix

Technical details

24
Possible cause
The USB port is intended for
devices working in accord-
ance with the USB standard.
Not all devices available on
the marketplace conform to
this standard. It is a possibil-
ity that a device not working
in accordance with the USB
standard is connected.
The card may be defective,
dirty or not properly inserted.
NOTE
► Please contact Customer Service (see warranty card) if you are unable to
resolve the problem with any of the above actions.
General
Input voltage
Input current
Rated power
Operating temperature
Storage temperature
Humidity (no condensation)
Dimensions (L x W x H)
Weight including accessories
Device fuse
Automotive blade type fuse
Rectifi cation
Connect a device that works in accord-
ance with the USB standard. Check that
the data carrier is formatted with the
FAT32 fi le system.
Check the card. Slide it in with the let-
tered side pointing upwards. Check that
the data carrier is formatted with the
FAT32 fi le system.
12
max. 7.5
4 x 7
+5 - +40
0 - +50
≤ 75
approx. 18.6 x 12.7 x 5.7
approx. 700
7.5
V DC
A
W
°C
°C
%
cm
g
A
SAR 28 A1