Connecting An External Audio Device To The Device; Cleaning; Safety Instructions; Cleaning The Display - Silvercrest SAR 28 A1 Operating Instructions Manual

GB
CY

Connecting an external audio device to the device

Cleaning

Safety instructions

Cleaning the display

Disposal

Disposal of the device

22
Search for directories
♦ Press the A/PS
played back is shown.
♦ Turn the multi-controller
♦ Press the 1/PAU
14
Playback of the fi rst title from the selected directory starts immediately.
♦ Connect the audio output of an external audio device (e.g. an MP3 player)
via a 3.5 mm stereo jack plug to the AUX
the device.
♦ Select audio input playback by repeatedly pressing the MD/PTY
button until AUX is shown on the display.
CAUTION
Possible damage to the device
► To avoid irreparable damage, ensure that no moisture penetrates into the
device whilst it is being cleaned.
■ Only clean the front panel of the device / the display with a soft, moist,
lint-free cloth and mild dish washing liquid.
Never dispose of the device in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU-WEEE (Waste Electrical and Electronic Equipment).
Dispose of the device through an approved disposal centre or at your community
waste facility. Please observe currently applicable regulations. Please contact
your waste disposal centre should you be in any doubt.
button three times. The directory currently being
16
to switch between the available directories.
17
button to select the directory currently being displayed.
8
socket on the front panel of
3
SAR 28 A1