Advertisement
ADAS+ mus t be ins talled in a profess ional ins tallation s hop
*B efore attempting to ins tall, pleas e read ins tructions carefully
[ Main-body ins tallation]
1
2
3
4
5
Clean installation
surface of windscreen
(windshield)
Remove tape off
bracket and install in a
suitable place
horizontally
After connecting to Dual
HUB , connect and
arrange the main body -
to-Dual HUB cable .
Connect power cable to
vehicle wires
(refer to Dual HUB Pin
Map)
Connect optional
devices to Dual HUB,
afterwards , connect the
vehicle cable
6
7
* Ins tallation Notice2.
! Turn off vehicle power completely before
① connecting product to Dual HUB
② and connect optional devices( display & vibrator )
to Dual HUB
③ at the finish , connect the vehicle cable
! If the product and optional devices are connected
when turned -on vehicle power is applied to Dual HUB ,
it may cause internal product damages.
! It is recommended to change settings when vehicle
power is switched to IG status. If Camera Reset is
done in an unstable shaking condition , ADAS
functions may not perform properly.
If powered on , follow
the installation guide to
start setup.
If setup process finishes ,
a Live -view screen will
appear .
Advertisement
