Troubleshooting - Nespresso VERTUO User Manual

11
T R O U B L E S H O O T I N G
PANNES FEHLERBEHEBUNG
FR DE
RESOLUCIÓN DE PROBLEMAS
ES
ŘEŠENÍ PROBLÉMŮ ROZWIĄZWANIE PROBLEMÓW
CS PL
RU
OPLOSSEN FEJLFINDING
DA
VIANMÄÄRITYS
FI
EN
VERTUO / VERTUO NEXT / VERTUO PLUS
1 No light on the bu on.
2 No co ee, no water.
3 Co ee is not hot enough.
4 Leakage or unusual co ee flow. • Check that the water tank is well positioned.
5 Machine turns to "OFF mode".
6 Co ee grounds in the cup.
VERTUO / VERTUO NEXT
7 The machine doesn't start and
has light steady on. If blinking,
see next points.
8 The machine doesn't start and
light blinks alternately; 1 blink
and 1 pause.
UM_NEW LAYOUT_VERTUO_1.indd 33 UM_NEW LAYOUT_VERTUO_1.indd 33
RISOLUZIONE PROBLEMI
IT
RESOLUÇÃO DE PROBLEMAS
PT
PROBLEMEN
NL
FEILSØKING FELSÖKNING
NO SV
AR
• The machine has turned OFF automatically; push the bu on
or "UNLOCK" the machine.
• Check the mains, plug, voltage, and fuse.
• Check that the water tank is filled.
• Check that a fresh capsule is inserted in correct position,
that the handle is properly locked and push the bu on to
start.
• Descale if necessary.
• Open the machine head and let the capsule be ejected.
Then perform a cleaning as per cleaning section.
• Preheat cup with hot drinking water from the tap.
• Descale if necessary.
• To save energy the machine will turn o a er 2 minutes of
non-use.
• See paragraph on "Energy Saving Concept".
• Perform the cleaning procedure twice.
• See paragraph on "Cleaning".
• Check that handle is properly locked.
• If you want to brew a Co ee or Espresso, check that a fresh
capsule is inserted in correct position, that the handle is
properly locked and push the bu on to start.
• If you are cleaning, descaling or emptying the system, check
that no capsule is inserted then close, lock the machine and
push the bu on to start one of these operations.
• Fill the water tank and push bu on to start.
• Check that handle is properly locked.
33
31.03.20 09:21 31.03.20 09:21