Factory Settings Of The Duofern Environmental Sensor - RADEMACHER DuoFern Installation And Operating Manual

i

Factory settings of the DuoFern Environmental Sensor

DCF clock:
Active limiting value group:
Solar function active *:
Solar limit value:
Sun detection after:
Shade detection after:
Solar direction function active:
Link sun to temperature:
From a temperature of:
Dawn function active *:
Dawn limit value:
Dusk function active *:
Dusk limit value:
Wind function active:
Wind, set limit:
Rain function active:
Temperature function active:
Temperature, limit value:
* Limit values 2- 5 are deactivated at the factory
44
OFF
A
Yes
31 kLux
10 minutes
20 minutes
No
No
10 °C
Yes
60 Lux
Yes
15 Lux
No
12 m/s (43.2 km/h)
No
No
-10 °C
EN