RADEMACHER DuoFern Installation And Operating Manual page 36

i
Installation of the DuoFern Environmental Sensor
8)
7)
6)
Legend
1) Cable connection to the rain sensor in the housing cover
2)
Drive connections (spring-loaded terminal,
solid conductor up to 1.5 mm² or fine-wire conductor
3)
Opening for a motor cable
4) Power supply connections (230 V/50 Hz, spring-loaded terminal, L1 / N /
suitable for solid conductor up to 1.5 mm² or fine-wire conductor
5) Opening for the power supply connecting cable
6) Antenna
7)
Fine fuse 6.3 A
8) Reset button
When connecting the cable, the printed circuit board must not be removed from the
bracket.
36
5) 4) 3) 2)
ATTENTION!
1)
/ N / Up / Down), suitable for
EN
),