Figure 5-35 Common Memory Area Setup Window For Other Participating Nodes - Hitachi FL.NET User Manual

5 USER GUIDE
(2) Setting the LPU memory area for the other nodes
Perform reception setup for the other nodes with the setup tool named [S10V FL.NET
SYSTEM].
The data received from various nodes are transferred to the area allocated in the LPU
memory. If the LPU memory area word count differs from the common memory size
setting (link parameter area word count), the FL.NET module transfers data from the
common memory. The amount of this data transfer is determined from the number of
words specified by the LPU memory area word count setting. To acquire the entire data
received by the common memory, ensure that the size setting made is equal to the common
memory setting (link parameter setting) for the other nodes.
Enter the starting
PI/O address and
size for the area 1.
Enter the starting
PI/O address and
size for the area 2.

Figure 5-35 Common Memory Area Setup Window for Other Participating Nodes

Indicates the LPU memory
allocation area for the
local node number.
LPU memory area setup for the other
participating nodes
5-38