5.5.2 Other nodes display
Function: Display the contents of areas 1 and 2 of either the local node (self-node) or another
distant node, whichever has been selected in the [[Online] Self-node information] or
[Other node information] window.
For using this function, it is a prerequisite that the PCs is connected with the PC by cable.
Operation: The procedure is shown below.
(1) When the FL.NET system is running in online mode, click the
in the [[Online] Self-node information] or [Other node information] window (see Subsection
5.5.4).
(2) The [Node data] window is displayed.
(3) If the data from area 1 or 2 cannot be displayed all at once because of limited screen size, the
scroll buttons
to bring any unseen portion of the data into view.
(4) If you want to monitor the data in areas 1 and 2, click the
you want to add changes to the data, click the
on the data, click the
When using the
node.
and
▲
▲
▼
▲
Close
button.
Write
button, note that no changes can be added to the data for any other
▼
are made available. Click any of these buttons
▼
Start monitoring
Write
button. If nothing needs to be done
5-125
5 USER GUIDE
Display node data
button. If
button