Using The Management Tables - Hitachi FL.NET User Manual

5 USER GUIDE

5.3.6 Using the management tables

The FL.NET module uses various management tables to manage the status of communications
with remote nodes.
You can determine the status of communications with the remote nodes by referencing these
management tables.
Note, however, that the setup tool named [S10V FL.NET SYSTEM] must be used to reference
the management tables within the FL.NET module.
For details on the procedures to be performed from various windows, See "5.5 Operating
Method."
(1) Referencing the self-node management table
To view the self-node management table, use the setup tool [S10V FL.NET SYSTEM] to
display the information about participating nodes. When a list of the numbers of the nodes
that have participated in the network appears on the display, select the on-window icon for
the self-node.
Figure 5-40 Participating Node Number List Window 1
The node displayed in red is
the self-node. When you
double-click on it, the
information about the self-
node appears on the display.
5-104