Advertisement
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
1.0 Product Description
1.1 General Description
Vertical Clamping Vice
Hinged T-Slot Table
The PICO-200 is a diamond wafering saw with a flat table capable of sectioning delicate specimens. The
PICO-200 is a table saw variant of the PICO line of wafering saws.
The specimen is secured to the table using vertical clamps while the blade is manually fed into the part.
Being equipped with a versatile T-Slot table the PICO-200 has and endless amount of clamping positions.
This allows the saw to cut longer parts that are typically harder to impossible on a standard gravity feed
wafering saw.
Many blade sizes ranging from 5 to 7 inches are supported. Wet or dry cutting is possible with the PICO-
200. An internal coolant tank is located below the hinged table.
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
Front Control Panel
PICO-200 Table Saw
I
NSTRUCTION
M
ANUAL
Web: http://www.metallographic.com
Magnetic Safety
Cut-Off
Cutting Guide
Manual Blade Feed
Wheel
1
Advertisement
