Advertisement
PICO-200 Table Saw
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
M
NSTRUCTION
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
Web: http://www.metallographic.com
2.3.2 Machine Connections
Drain connection with
release valve (recessed
Power inlet connection
into back of machine)
with built in fuse holder
Drain Hose: The Drain hose needs to have enough clearance to avoid kinking of the line.
If there is not enough clearance the machine will not be able to drain properly. Replacing
the coolant in the tank is essential for proper cutting, cooling, and cleaning of the blade.
Refer to the Maintenance section for recommended usage.
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
5
Advertisement
