Advertisement
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
3.0 Safety Guidelines
3.1 Warning Signs
!
This sign points to special safety features on the machine
3.2 Safety Precautions
Careful attention to this instruction manual and the recommended safety
!
guidelines is essential for the safe operation of the PICO-200.
Proper operator training is required for operation of the PICO-200 Any
unauthorized mechanical and electrical change, as well as improper
!
operation, voids all warranty claims. All service issues need to be reported
to the manufacturer supplier.
!
Operate unit as specified in this manual
Do not leave any specimen or other parts on the working surface when not
!
operating machine
!
When unit is not in use, turn off the power
!
Secure the sample well before attempting a cut
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
PICO-200 Table Saw
I
NSTRUCTION
M
ANUAL
Web: http://www.metallographic.com
6
Advertisement
