Advertisement
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com
4.5 Blade Cutting Capacity
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
PICO-200 Table Saw
Max Height: 15.35mm
Cut Depth at Max Height: 60.5mm
Max Cutting Depth: 106mm
Max Height: 28mm
Cut Depth at Max Height: 41.5mm
Max Cutting Depth: 106mm
Max Height: 40.75mm
Cut Depth at Max Height: 25mm
Max Cutting Depth: 106mm
I
M
NSTRUCTION
ANUAL
Web: http://www.metallographic.com
NOTE: The PICO-200
Accepts blades ranging
from 6 inches to 8
inches. The charts
demonstrate a best-
case scenario for each
blade. Apply a 5% error
for each value to assure
compatibility.
12
Advertisement
