Yardworks 060-1985-6 Instruction Manual page 15

model no. 060-1985-6 | contact us: 1.866.523.5218
B1
3. STARTING AND STOPPING (SEE FIG. D)
- STARTING
1
Move the on/off switch forward to the "I" position.
- STOPPING
Move the on/off switch backward to the "O" position.
- VARIABLE SPEED CONTROL
The on/off switch with variable speed (2) controls the airflow. The airflow can be adjusted from
the minimum to maximum by pushing the on/off switch forward. The airflow increases slowly
when the on/off switch is pushed forward gradually.
C1
+
D
E1
WARNING: The battery pack will be too cold to be used if it has
been left in the environment with too low temperature (less than
-20 degrees Celsius) for a long time. The battery pack needs to be
warmed up before use.
WARNING! The tool runs for a few seconds after it has been
switched off. Let the motor come to a complete standstill before
setting the tool down.
F
B2
2
C2
-
E2
I
II
15