Led Light Case Section - Makita XUC01 Repair Manual

8-3

LED Light case section

Right side
< >
Route Lead wire of LED circuit
through this groove.
Don't make a slack in
this space.
LED circuit
Don't put any Lead
wires on this Rib.
Left side
< >
Route Lead wire of LED
circuit through this groove.
Don't make a slack in
this space
LED circuit
Don't put any Lead
wires on this Rib.
Assemble the tip of Sheath of Power supply
cord (with two Connectors) in this zone.
Assemble the tip of Sheath of Power supply cord (with
a Connector) in this zone.
Line filter ( with LED circuit)
Assemble the tip of Sheath of Power supply cord
(with a Connector) in this zone.
Line filter (with LED circuit)
33 / 41
Assemble Power supply cord unit
(with two Connectors) at this side.
Assemble Power supply cord unit
(with a Connector) at this side.
Assemble Power supply cord unit
(with a Connector) at this side.