Table of Contents
Advertisement
Fig. 42
[1]
Yellow line
[4]
Fig. 43
Fig. 44
[1]
Fig. 45
[1]
10
Remove Valve core according to Fig.35.
6
[3]
Be careful not to make a damage to Wiring of Motor [3]
[2]
and Snap in valve [4] and assemble Front tire 430 [1].
If the opposite side of Snap in valve is inserted first it can
be smoothly assembled.
7
8
[2]
9
If the engagement is smoothly done the sound "poo" will
be heard .
[2]
18 / 41
Insert the Yellow line side of Front tire 430 [1] into Brake
disc side of Wheel and engage lower side of Beads with a
Lever [2] for replacing tire.
Tips
Apply Bead cream to the opposite side of Bead.
Engage the Wheel and Front Tire with Lever for replacing a
tire. Snap in valve [2] area must be inserted in the final step
of insertion.
Put upside-down the Wheel [1]. Turning it push Front tire
430 [2] and pull the Wheel [1] to engage opposite (wiring)
side of Wheel and the Tire.
Tips
If Valve core is removed, air will be smoothly pumped up
and bead of Wheel and Tire can be smoothly engaged.
Tips
Advertisement
Table of Contents
