8
WIRING DIAGRAM
8-1
Center case section
8-1-1
Assembling of Controller
Put Line filter Controller lead wire (orange, white,
blue) connected to Terminal (Key side) in this
space. (If it is used)
Pass Controller lead wire connected
to Terminal through the Opening.
8-1-2
Assembling of Terminal
Do not put any Lead wires on Ribs.
Rib
Key insertion hole
Line filter
(
if it is used)
Opening
Line filter
(
if it is used)
Terminal (Key side)
23 / 41
Fix Controller with these Hooks.
Pass Controller lead wire connected to
Rib A
Terminal between two Rib A.
Put Line filter through Controller lead wire (red, black,
yellow) connected to Terminal (opposite side of Key) in
this space. (If it is used)
Terminal (Opposite side of Key)
Rib