Bartscher KV1 Smart Manual page 20

, beverage s etti ngs, applianc e s etti ngs, etc., sel ect from amongst various s etti ng opti ons by pres sing the '∧' and '∨' setti ng buttons.
Grinding coarseness setting
1. The coarseness of the ground coffee must be adapted to the selected coffee
beans.
NOTE: The grinding coarseness may only be set when the appliance is not
preparing any beverages.
2. Open the grinder cover. It is found before the coffee container.
Use the adjustment knob to set the selected grinding coarseness from 'very fine'
('finest') to 'very coarse' ('roughest').
EN
Coffee preparation
1. Before starting to prepare coffee, set the selector knob to 'frothed milk'.
18 / 32
3. If during preparation the coffee flows very
4. If the ground coffee is dark, we
5. If the ground coffee is light, we
The changes to the grinding coarseness will
only be noticeable after 2 or more fresh cups
of coffee are brewed.
2. Press the coffee strength button, as soon as
the display shows the 'Ready' message.
3. Use the '<' or '>' button, and keep pressing it
to change the coffee amount.
When the grinding process is finished, you
cannot change the coffee amount.
4. Use the '<' or '>' button, and keep pressing it
to change the coffee amount.
Installation and operation
slowly or does not flow out completely,
set the grinding coarseness to 4 or 5.
recommend the highest coarseness
grinding setting.
recommend the finest grinding setting.
190069