Bartscher KV1 Smart Manual page 16

Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
•
Do not use the appliance with an external timer or remote control.
Water connection
For the water supply, the appliance comes with a factory-installed water tank.
If needed, the appliance may be connected to external water tank (which is located
at the same height as the appliance).
EN
14 / 32
1. Put the lever to 'Tank' position, to use the
integrated water tank.
2. Put the lever to 'Barrel' position, to use the
external water tank.
3. Connect the enclosed silicone hose to the
appliance, and put the other end to the external
water tank.
Installation and operation
190069