Table of Contents
Advertisement
Model 801 EM Current Meter
Page 10
STOP
Press to cease sampling. This will force an early end to an averaging period at the
next second.
LOW BATT
When there is approximately 4 hours of battery life remaining [with backlight], this
message will be displayed at the bottom right hand corner of the screen [see
DISPLAY 1 for an example]. The message will remain until batteries are replaced.
See Section 5. for more information on power consumption and battery life.
4.4. Setting Units, Averaging Mode and Averaging
Period
Selecting SET-UP in the Run Menu reveals the following display:
< < < M / S E C
< < < F I X E D
< < < A V E R A G E
M/SEC FT/SEC
FIXED MOVING FREE
AVERAGING PERIOD
OPTIONS
ACCEPT
© 2016 Valeport Ltd
I N I T I A L I S I N G
P L E A S E
R U N
M E N U
F T / S E C
M O V I N G
F R E E
P E R I O D
Toggles between measuring the Speed in metres and feet per
second.
Toggles the averaging mode between the three states. Refer to
Section 3 for further details.
The Averaging Period which has been set is displayed. If it is required
to change this, then press the key to move to the "Change
Sampling" page. Refer to Section 4.4.1.
Press this key to return to the OPTIONS menu [Section 4.5.]
When the sampling regime is correctly set up, press this key to return
to the RUN menu [Section 4.3.].
E M
W A I T
S E T U P
S S S
S E C S
O P T I O N S > > >
A C C E P T > > >
Advertisement
Table of Contents
