Table of Contents
Advertisement
ABB i-bus
®
KNX
Commissioning
3.2.2
Parameter window LAN -> KNX
In the parameter window LAN -> KNX it is possible to define the processing of telegrams from the LAN
network to the KNX system.
Group telegrams
main groups 0...13
Options:
This parameter defines whether the telegrams with group addresses of the main groups 0 to 13 are
filtered, routed or blocked.
Filter: The telegrams with the group addresses of the main groups 0 to 13 from the KNX to the LAN
•
are filtered in accordance with the filter table, which is automatically calculated by the ETS.
•
Route: All group telegrams of main groups 0 to 13 are routed without considering the filter table
settings.
•
Block: All group telegrams of main groups 0 to 13 are blocked without considering the filter table
settings.
Filter
Route
Block
Important
This setting is useful only for commissioning and diagnostics. It should not be used during normal
operation.
As this setting can overload the KNX lines, a loss of telegrams could occur.
IPR/S 3.5.1 | 2CDC502099D0211 Rev. A 23
Advertisement
Table of Contents
