Table of Contents
Advertisement
ABB i-bus
®
KNX
Device technology
KNX safety extra low voltage
Temperature range
Ambient conditions
Design
Mounting
Mounting position
Weight
Housing, color
Approvals
CE marking
Device type
IPR/S 3.5.1
* ... = Current version number of the application. Please refer to the software information on our homepage.
Note
ETS 5 and the current version of the device application are required for programming.
If the device is to be operated in KNX Secure mode, the commissioning key (FDSK; see chapter 3.5,
KNX
The latest version of the application and corresponding software information are available for download
from www.abb.com/knx. After import into ETS, the application appears in the Catalogs window under
Manufacturers/ABB/System components/Coupler.
The device does not support the locking function of a KNX device in ETS. If you use a BCU code to
inhibit access to all the project devices, it has no effect on this device. Data can still be read and
programmed.
Exception: When KNX Secure mode is activated, the device can no longer be programmed with a
different ETS.
12 2CDC502099D0211 Rev. A | IPR/S 3.5.1
Application
IP Router Secure/...*
Secure) on the side of the unit will be required as well.
SELV 30 V DC
Operation
Storage
Transport
Maximum air humidity
Atmospheric pressure
Modular installation device (MDRC)
Dimensions
Mounting width
On 35 mm mounting rail
Any
0.1 kg
Plastic, halogen free, gray
KNX to EN 50491 and EN 60 669-2-5
In accordance with the EMC and
Low Voltage Directives
Maximum number of
group objects
0
-5 °C...+45 °C
-25 °C...+55 °C
-25 °C...+70 °C
95%, no condensation allowed
Atmosphere up to 2,000 m
Modular installation device, pro M
90 x 36 x 63.5 mm (H x W x D)
2x 18 mm modules
To EN 60 715
Maximum number of
Maximum number of
group addresses
assignments
0
0
Advertisement
Table of Contents
