Configuration; Configuring A Pc To Communicate With Awin Gw100 Wirelesshart Gateway; Figure 8: Properties Window To Change Ip Address Of A Pc - ABB AWIN GW100 User Manual

Wireless industrial network

Hide thumbs Also See for AWIN GW100:

Table of Contents

CO NFIG U R I NG A PC TO COMM U N IC AT E WI T H AWI N GW 100 W IR E L ES SH AR T G AT EWAY

Configuration

6.1

Configuring a PC to communicate with AWIN GW100

WirelessHART Gateway

1. Connect the AWIN GW100 to an Ethernet network using a CAT5 cable plugged into the

RJ45 socket.

2. Go to the Network Connections dialog box, and then click Local Area Connections but-

ton. Right-click and select Properties from the context menu.

3. Highlight Internet Protocol (TCP/IP), and then click Properties button.

4. Click Use the following IP address button, and enter a desired IP address for the PC, for

example,

Note. IP address assigned to the PC must be different to that of the AWIN GW100 gate-

way.

5. Enter

255.255.252.0

2 8

172.16.16.16

in the "IP address:" field.

in the "Subnet mask:" field, and then click OK button.

These steps may be different depending on MS Windows version used. These

steps are valid for Windows 10 only.

CO NFIG U R AT IO N

3BN P 102 9 12 C

Table of Contents

Show Quick Links

Table of Contents