Dual-Port 10 Ge Sfp+ Interface Module - 3Com 4210G Series Getting Started Manual

insert an XFP transceiver into the port to connect it to another XFP port through an optical fiber. You can
select the XFP transceivers list in

Dual-Port 10 GE SFP+ Interface Module

Figure 1-20 Dual-port 10 GE SFP+ interface module
Figure 1-21 Front panel of dual-port 10 GE SFP+ interface module
A dual-port 10 GE SFP+ interface module provides two 10 Gbps SFP+ ports. You can insert an SFP+
transceiver into the port to connect it to another SFP+ port through an optical fiber, or an SFP+ cable
provided by H3C. For details about the supported SFP+ transceivers and SFP+ cables, refer to
1-18.
Table 1-18 SFP+ transceivers and SFP+ cables supported by dual-port 10 GE SFP+ interface module
Transceiver
/Cable type
10 GE SFP+
transceiver
Short-haul
10 GE SFP+
cable
Table 1-17
Central
Transceiver/
waveleng
Cable
th
SFP-XG-SX-
850 nm
MM850-A
SFP-XG-LX2
20-MM1310
1310 nm
SFP-XG-LX-
SM1310
LSWM1STK
LSWM2STK
—
LSWM3STK
LSWM4STK
as required.
Connector
50/125 µm multimode
optical fiber
62.5/125 µm
LC
multimode optical fiber
9/125 µm single mode
optical fiber
— SFP+ cable
1-18
Max
Fiber transmission
distance
300 m (984.25
ft.)
220 m (721.78
ft.)
10 km (6.21 mi)
0.65 m (2.13 ft.)
1.2 m (3.94 ft.)
3 m (9.84 ft.)
10 m (32.81 ft.)
Table