Labeling Diagram - Vestil H Series Instruction Manual

LABELING DIAGRAM

The unit should be labeled as shown in the diagram. However, label content and location are subject
to change so your product might not be labeled exactly as shown. Thoroughly photograph the unit when
you first receive it as discussed in the "Written Record" portion of the Inspections and Maintenance
section on p. 9. Make sure that your record includes a photograph of each label. Replace all labels that
are, or later become, damaged, missing, or not easily readable (e.g. faded). To order replacement labels,
contact the technical service and parts department online at http://www.vestilmfg.com/parts_info.htm.
Alternatively, you may call (260) 665-7586 and ask the operator to connect you to the Parts Department.
F
E
Product labeling is subject to
change without notice.
A: Label 375
C: Label 620
E: Label 208
F: Label 220
Copyright 2018 Vestil Manufacturing Corp.
Rev. 7/20/2018
A
B: Label 635
D: see tables below
Model Label
H-25-LD 627
H-25-MD 549
H-25-HD 538
H-50-LD 629
H-50-MD 535
H-50-HD 628
H-hoppers MANUAL
B
C
D
E
Model Label
H-100-LD 533
H-100-MD 536
H-100-HD 539
H-150-LD 534
H-150-MD 537
H-150-HD 590
Page 10 of 11